Ruger 10/22 Magnum

621 i flute barrel 623 ultralite barrel 622 ultralite barrel 347 thm barrel w black ends 176 snake fluted barrel 177 ss match barrel 178 ss muzzleweighted barrel 182 straight fluted barrel w 32 hole comp 339 ss barrel w 32 hole comp

Stainless Match Barrel

621 i flute barrel

Our stainless steel drop-in 0.920" bull barrels set the standard in accuracy and performance for rimfire barrels. They feature match bore and chamber dimensions and vary no more than +/-0.0001" from breech to muzzle. Each barrel is digitally measured and inspected. The barrel shank is machined 0.0025" oversized to create an extremely tight fit into the factory receiver. This prevents the barrel from canting once the locking block is installed. We’ve developed our unique chamber to provide optimal accuracy but also superior function.

All barrels for the 10/22 LR are drilled and tapped to accept our Barrel Mounted Scope Mount.</ … (more details).

Stainless Muzzle Weighted Barrel

180 muzzleweighted barrel black

Our muzzleweighted barrels are designed for the shooter who requires match-grade accuracy while using the factory sporter stock. Muzzleweighted barrels offer superb balance whether used for competition or serious plinking. This barrel is built off our Stainless Match Barrel and machined to the muzzleweighted configuration. This eliminates the main compromise made in other factory-contoured barrels – the decrease in accuracy due to the narrow muzzle profile. These barrels utilize the factory contour through the stock but contour back to a full bull barrel at the muzzle to allow bull barrel accuracy.


  • 16.5" Long
  • 3lb 4oz base weight

THM Tension Barrel

404 lightweight barrel with muzzle threads

The Lightweight THM Tension Barrel sets the standard for what a lightweight barrel should be. It features a sleeve that is used to create tension on the barrel itself. This unique design eliminates issues typically found in smaller barrel profiles. The THM tension barrel consists of a special taper honed match barrel and chamber. This is the ultimate lightweight barrel.

All barrels fit for the 10/22 LR are drilled and tapped to accept our Barrel Mounted Scope Mount.

Available with either a carbon fiber sleeve or an anodized aluminum sleeve. The two sleeve options are comparable in weight and performance. The anodi … (more details).

Ultralite Barrel

623 ultralite barrel

The UltraLite barrel is a lighter weight version of our THM Tension Barrel that has set the standard for lightweight barrels. It has been taken one step further and made even lighter!

A carbon fiber sleeve is tensioned in place to eliminate barrel vibration issues typically found with smaller diameter barrels. This barrel can be set up with 1/2 × 28 threads and fitted with any of our available compensators.

Our UltraLite barrel was specifically designed for rimfire steel shooting. Its extreme lightweight design allows the shooter to transition from one plate to the next faster than ever.


  • Due to the barrel design it is not drilled & tapped to accept our barrel mounted scope mount.
  • Available in 22 LR only
  • 15oz base weight
All serial numbered items must be shipped to an FFL dealer.
All firearm orders require a $250 non-refundable deposit to initiate production.
Copyright ©2015 Volquartsen® Custom
Contact with website issues or suggestions.
10/22, 22/45, and Mark III are registered trademarks of Sturm, Ruger & Co., Inc.

Receive Exclusive Offers

Enter your email below to receive exclusive offers and promotions.

You'll also receive the latest news regarding product releases and events.

* indicates required
or skip signup