New Products

610-mkiii-extended-mag-release 660-chamber-flag 493-llv-with-thread-protector 510-new-llv-on-red-frame 584-cleaning-mat 550-extended-bolt 616-ssar 609-mkii-disconnector 509-llv-on-od-frame

Large Forward Blow Comp

319-large-forward-blow-compensator

The Large Forward Blow Comp is CNC-machined and 1.25" in diameter and 4" long.

The ports are machined at an angle that directs the noise blast downrange and away from the shooter.

Specs

  • Available with both a .920" and .875" diameter
  • 3oz base weight

Extended Magazine Release for MKIII

610-mkiii-extended-mag-release

The MKIII Extended Magazine Release is an 1/8" longer than the factory release providing easier access. This release has also been modified to improve insertion of the factory magazines.

Specs

  • CNC Machined from stainless
  • Designed for the Ruger MKIII steel frame

Competition Bolt for Ruger MKII or MKIII

550-extended-bolt

Are you a competitive shooter looking to eliminate stovepipes, failures to fire and improve the overall performance of your Ruger MKII or MKIII pistol? The Competition Bolt is the answer!

The Competition Bolt is CNC-machined and ground for superior tolerances, fit and finish. It features an Exact Edge Extractor as well as the SureStrike Firing Pin.

The Competition Bolt has an integral Extended Bolt Racker to allow for improved manual cycling of the bolt – no more pinched fingers!

Specs

  • Available in either a black nitride or silver hard chrome finish
  • 4oz base weight

CNC-Machined Disconnector for MKII and MKIII

609-mkii-disconnector

Our CNC-Machined Disconnector is CNC-machined from 416 stainless steel. The machining process allows us to make several design changes to the the way the disconnector functions. We have added material that increases rigidity over the current design. This increased rigidity not only improves trigger pull but also will improve overall functioning as it will prevent any binding or interference that can be found on the prior design and factory design. This is due, in part, to variances in the factory frame tolerances.

The CNC-machined design also features an integral pin without the step found on the factory design. We have also machined the pin that comes in contact with the trigger plunge … (more details).

Pistol Competition Kit

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes our Accurizing Kit, Bolt Tune-Up Kit and CNC-Machined Disconnector. The Pistol Competition Kit is designed to produce a crisp, clean 2.25 trigger pull, eliminate stovepipes, and eliminate failures to fire!

VC Cleaning and Maintenance Mat

584-cleaning-mat

Protects your table and firearms from scratches and spilled gun cleaning fluids. Perfect for rifles or handguns. The clear bonded backing prevents soak-through issues. Keeps gun parts organized and in place during cleaning or installation of Volquartsen aftermarket components. Durable, stain resistant and long lasting.

Bright orange surface makes it easy to locate parts whether they are stainless or blued!

Specs

  • Absorbent, attractive fabric
  • Waterproof, bonded backing prevents leak through
  • Easy to clean with soap and water, simply hose or power wash off
  • 14 × 40 inches
  • 4oz base weight

Posi-Lock Bolt Latch for MKII and MKIII

596-mkiii-bolt-stop

Are you tired of having to replace your factory bolt hold open latch? Our new Posi-Lock Bolt Hold Open Latch has been engineered to withstand years of use for even the most demanding shooter.

Manufactured from hardened A2 tool steel this latch contacts the bolt in a more effective way in order to ensure the bolt locks open on each and every empty magazine.

Specs

  • Fits both the Ruger MKII and MKIII pistols (does not fit the 22/45 model)

Cross Reference

Replaces Ruger Part #AN-37

Slide Fire SSAR-22 Bump-Fire Stock for Ruger 10/22

598-tg2000-slidefire-logo

The SSAR-22™ is a complete kit for the Ruger® 10/22® rifle that includes an SSAR-15® OGR stock, chassis system and our TG2000.

SSAR-15 OGR Features:
Allows shooter to shoot as quickly as desired, in a safe manner.
Easily installs on the Ruger® 10/22®.
No permanent modifications necessary.
30 day money back guarantee.
Made in the USA.
Constructed of Premium Reinforced High Strength Polymer.

Chassis System
This 10/22® Chassis System is designed to enhance the functionality and aesthetics of a standard RUGER 10/22® rifle.

Includes:
SSAR-15® OGR Rifle Stock: Black. (Right or Left Handed)
TG2000 Trigger Guard
Tac-2 … (more details).

Carbon Fiber Grips for 22/45

618-carbon-fiber-grips

Its our lightest grip offering yet! Our new carbon fiber grips are now available for both the Ruger 22/45 (replaceable grip panel model only) and our VC Target Frame in the 1911 style configuration.

Grip panels are made from high modulus carbon fiber blanks featuring bi-directional uni-directional carbon fiber with 3k twill carbon fiber skin.

Pre-orders can be placed now and they will ship January 2014

Rimfire Chamber Flag with VC Logo (set of 5)

660-chamber-flag

Bright yellow chamber flag shows the firearm is unloaded. Chamber Flag is printed with the Volquartsen Custom name and logo and is sold in sets of five.

LLV Competition Pistol Upper

492-llv-on-stainless-mkiii-frame

The LLV barreled receiver has been completely redesigned. A great design has been made even better – better balance, more versatile and, yes, even better accuracy!

A hard anodized CNC-machined billet receiver is the foundation of this lightweight setup. The receiver and barrel shroud are precision-machined as one piece from aluminum alloy. An integral Picatinny rail is machined into the top of the receiver. It is then fitted with either a 4.5" or 6" precision stainless steel barrel that has been machine-honed and lapped. The barrel has been contoured to reduce weight without sacrificing accuracy.

The LLV Competition Upper features a stainless steel breech face designed to withstan … (more details).

All serial numbered items must be shipped to an FFL dealer.
All firearm orders require a $500 non-refundable deposit to initiate production.
Copyright ©2014 Volquartsen® Custom
Contact webmaster@volquartsen.com with website issues or suggestions.