Scope Mounts & Rails

134 picatinny mount system all colors 264 green picatinny rail on 22 45 frame 262 blue picatinny rail on 22 45 frame 260 red picatinny rail mounted on volquartsen barreled receiver 130 picatinny mount system black 489 alchin mount silver 257 silver picatinny rail installed on volquartsen barreled receiver 20 10 22 silver receiver mount 17 mkii mkiii scope mount silver

Scope Mount for MKII and MKIII

24 mkii mkiii scope mount black

Weaver style scope mount featuring seven cross slots to allow for the mounting of most red dot optics. Requires three drilled and tapped holes on receiver. It will fit in factory pre-drilled Ruger MKII and Ruger MKIII.


  • 4.6" long
  • Aluminum alloy

Picatinny Scope Mount for MKI, MKII and MKIII

714 mkii mkiii picatinny scope mount

Volquartsen Picatinny Scope Mount designed to fit Ruger MKI, MKII, MKIII and 22/45 pistols. The mount is designed to be a no-gunsmithing mount for those receivers that are drilled and tapped from the factory. CNC-machined from aluminum alloy to mil-spec Picatinny tolerances. The rear sight does not need to be removed to install this mount. Includes three mounting screws.

Scope Mount for High Standard

189 high standard scope mount silver

A Weaver style scope mount that attaches to a .900" diameter bull barrel and cantilevers back over the slide.

Designed to be used with a Volquartsen match barrel.


  • 2oz base weight

Scope Mount for Remington 597

A Weaver style scope mount that uses the factory receiver holes for mounting. Made of aluminum, includes mounting screws.

Nova Scope Rings

50 nova scope rings silver

These rings are the ultimate in providing accuracy and rigidity. It is a Weaver style ring CNC-machined to hold exact tolerances. There is no lapping needed! The top half of the ring is secured by four, 8-40 TORX screws. A 1/4-20 cross bolt provides for quick dismount as well as consistent return to zero. The Nova Rings are ideal for mounting any scope to a hard recoiling rifle. Available in both stainless steel and hard anodized aluminum.


  • 3oz base weight

Dovetail Scope Mount for MKI, MKII and MKIII

411 deltapoint mounted on mkii

The Volquartsen Dovetail Scope Mount converts the sight dovetail on a Ruger MKI, MKII and MKIII Pistol (includes 22/45) to a Picatinny style mount. This mount is the perfect mounting solution for small red dot optics that feature only one cross bolt (i.e., Leupold DeltaPoint). Simply remove the existing rear sight and use the two included set screws to securely install. CNC-machined from stainless steel, .660" long.

Allchin C-More Scope Mount for Ruger MKII, MKIII and 22/45

490 alchin mount black

Allchin Gun Parts Custom Scope Mount for C-More designed to fit any Ruger MKII, MKIII or 22/45 that is pre-drilled.

- Get your scope as close to the gun as possible
- Easy Scope Mounting (top holes accept C-More Rail or Slide mount with no modifications).
- Fits just over Ruger rear site

This mount allows you to get the C-More as close to the gun as possible. No gunsmithing required to install this mount. Use factory supplied mounting screws. It is also imperative that the C-More screws do not protrude through the bottom of the mount.

C-More Optic with Allchin Mount

The C-More Slide Ride has also become the sight of choice for “custom” applications because of its ability to attach to any flat surface. This enables the sight to be mounted directly to the firearm or a custom made mount, allowing the sight to be applied to applications that may not provide standard mounting options.

We have packaged the C-More with an Allchin Custom Mount which allows the optic to be mounted as low as possible on the Ruger MKII/MKIII pistol.

Picatinny Scope Mount for 10/22

161 10 22 picatinny scope mount silver

This scope mount is a no-gunsmithing mount for the 10/22 receiver. It is CNC-machined from an aluminum alloy to Picatinny specifications. The scope mount is .480" tall to allow the mounting of larger objective scopes. An extended length of 7" allows for a more versatile mounting platform in addition to the 17 cross slots machined into the mount. The mount extends approximately 2" forward of the receiver to facilitate the mounting of a wide range of optics. Includes four mounting screws.


  • 3oz base weight

Fusion Picatinny Rail

Mil-Spec Picatinny Rail designed to fit on the Fusion forend shroud. Available in black only.


  • Length 3.75"

Picatinny Rail for Browning Buckmark

723 buckmark

Volquartsen Picatinny Scope Rail for the Browning Buckmark pistols. This rail is CNC machined to mil-spec Picatinny dimensions. Machined from aluminum alloy.


  • Type III hardcoat black anodized
  • Overall length 6.5" (scope mounting area is 4.5" long)

Barrel Mounted Scope Mount for 10/22

25 10 22 silver barrel mount

A Weaver style scope mount designed to mount directly to .920" bull barrels. The mount cantilevers back over the receiver and utilizes one tension set screw in the rear of the mount for stability. It ensures that the scope will always be in alignment with the barrel regardless of any movement between the barrel and receiver. All Volquartsen bull barrels for the 10/22 will come drilled and tapped to accept this scope mount.


  • 2oz base weight

Receiver Mount for 10/22

20 10 22 silver receiver mount

A Weaver style scope mount that uses the Ruger factory receiver holes for mounting. The mount is .475" high to allow the mounting of larger objective scopes. Made of aluminum. Includes four screws for installation.


  • 2oz base weight

Picatinny Rail System for MKII and MKIII

265 red picatinny rail mounted on 22 45 frame

The tactically-influenced mount for the Ruger MKII and MKIII features a mil-spec Picatinny-style rail on both the top and bottom to provide an efficient double-mounting platform for virtually any combination of conventional scope, red-dot optic, laser-aiming device or tactical light. The new mount attaches easily to any Mk II, MKIII, and 22/45 models with a 5.5" bull barrel. The sturdy, yet, lightweight mount is CNC-machined from billet aluminum.


  • 8oz base weight

If installing the mount on a MKII that does not have the receiver drilled and tapped, this will need to be done prior to installing the mount.

All serial numbered items must be shipped to an FFL dealer.
All firearm orders require a $250 non-refundable deposit to initiate production.
Copyright ©2015 Volquartsen® Custom
Contact with website issues or suggestions.
10/22, 22/45, and Mark III are registered trademarks of Sturm, Ruger & Co., Inc.

Receive Exclusive Offers

Enter your email below to receive exclusive offers and promotions.

You'll also receive the latest news regarding product releases and events.

* indicates required
or skip signup