Gunsmithing Tools & Services

728 copper cutter 215 mkiii gun guide 145 otis cleaning kit 146 corrosion x 531 froglube 562 mainspring removal tool 730 syringe grease applicator 247 complete 22 pistols book 153 bedding system

Bedding System for 10/22 and 10/22 Magnum

153 bedding system

This is the same bedding system used on our complete rifles. Installs in less than 10 minutes. There is no mixing of compounds, no taping of barrel and no release agents required. This is designed exclusively for the “one take down action screw” design (i.e., Ruger 10/22, 10/22 Magnum). This kit comes complete with aluminum bedding block, foam pressure pad and installation drill along with complete instructions.

Mainspring Latch Removal Tool for MKII, MKIII and 22/45

562 mainspring removal tool

Manufactured from stainless steel, this wire EDM-cut tool makes removing the Ruger MKII, MKIII and 22/45 mainspring housing latch a much simpler process. This tool is designed to release the latch without scratching or gouging the mainspring housing or frame.

Bedding System Refill Kit for 10/22 and 10/22 Magnum

152 bedding system refill kit

The 10/22 Bedding System Refill kit features both the aluminum pillar as well as the foam pressure pads found in our 10/22 Bedding System. Designed for those that have already purchased the drill with stop.

BoreSnake

Brushes and swabs bore in one quick pass with built-in bore brushes. The multiple short brushes embedded in the floss pass easily through the shortest action or port. The initial floss area (inside the barrel) removes loose grit and debris prior to the scrubbing action of the brush. The main floss, with 160 times more floss than a patch, supercleans the bore. It also features a brass weighted drop-through cord that slips easily down barrel; Grasp and pull the cleaning cord through the barrel. Available for either .17 HMR/.17 Mach 2 or .22 LR/.22 WMR calibers.

Cleaning Kit for 22 LR and 22 WMR

145 otis cleaning kit

A nylon coated cable designed to be used as a pull through cleaning kit bore for 22lr and 22 WMR barrels. It allows the shooter to clean from breech to muzzle without having to remove the action from the stock. Also eliminates any chance of damaging crown by cleaning from the muzzle end.

Specs

  • 4oz base weight

AccuTec Barrel Pusher for Ruger 10/22

420 accutec ruger 10 22 barrel pusher

The AccuTec 10/22® BARREL PUSHER is a tool designed to facilitate the easy removal of factory and aftermarket barrels from the receivers of Ruger® 10/22® rifles. Installation on a field stripped receiver literally takes seconds.

  • The AccuTec 10/22® Barrel Pusher allows anyone to remove an existing barrel without the need for a bench-mounted vise and literally requires no effort.
  • The Barrel Pusher will not harm, scratch or mar any portion of the barrel or receiver.
  • Any mounted scopes/optics may remain in place.
  • Works on any caliber 10/22®
  • The perfect tool for the professional or amateur gunsmith.
  • Each tool is individually inspected for quality control.
  • Lifetime … (more details).

Target Front Sight Installation

442 mkiii sight

Due to minor fitting required on this item, we are offering an installation service for our Target Front Sight. Simply send us your pistol and it will generally be on its way back to you in 10-14 days.

Install HP Action Kit

Volquartsen will professionally install your HP Action Kit. There is no need to take it to a gunsmith, simply send us your trigger guard and it will generally be on its way back to you in 10-14 days. Price includes return shipping of your trigger guard only.

Drill and Tap MKII or MKIII Receiver

Volquartsen will professionally drill and tap your MKII or MKIII pistol. There is no need to take it to a gunsmith, simply send us your receiver and and it will generally be on its way back to you in 10-14 days.

Thread and Crown Bull Barrel

Volquartsen will professionally thread and re-crown your bull barrel. There is no need to take it to a gunsmith, simply send us your barrel and it will generally be on its way back to you in 10-14 days.

Available for 13/16X20, 1/2X28, or 1/2X20 threads. Please contact us for pricing on other thread needs.

Powder Coat Pistol or Rifle

Volquartsen will professionally powder coat your rifle or pistol. There is no need to take it to a gunsmith, simply send Volquartsen your firearm and it will be ready in 7-10 business days and be on its way back to you.

Available in black or silver. Firearm must arrive completely disassembled or additional charges may apply

Gun Guide for MKIII

215 mkiii gun guide

Complete disassembly & reassembly guide for the Ruger MKIII pistol (includes the Standard, Target Gov’t Target, Competition, Hunter and 22/45 Models). This book features 19 pages & 36 high-resolution grayscale images. This is the perfect tool for those customers looking for a little more information when performing aftermarket part installations or general maintenance on their Ruger MKIII.

FrogLube CLP (4 oz Liquid)

531 froglube

FROGLUBE® is a cutting edge biodegradable cleaner, lubricant and preservative made in the USA from all domestic components. It is a non-toxic substance that is very effective in dissolving carbon fouling and build up. It has a heavy specific gravity, which enables it to ‘season’ the metal for improved performance.

Specs

  • 4oz base weight

CorrosionX Gun Care Lubricant

146 corrosion x

CorrosionX for Guns cuts through stubborn bore deposits for easier, more thorough cleaning. It decreases fouling, even after hundreds or thousands of rounds. It also lubricates and protects mechanisms and bores even better and longer than products fortified with Teflon. Ideal for semiautomatics and automatics.

Sticks to metal like a magnet to prevent rust … even in the rain. CorrosionX for Guns comes in a 4 oz. (113.4g) plastic bottle, with an applicator tip that is ideal for firearms. It is easier than ever to apply the product, and get maximum protection and performance.

Specs

  • 4oz base weight

Gun Guide for MKII

247 complete 22 pistols book

RUGER .22 Automatic Pistols 1947 ~ 2004
For your Ruger Standard, Mark I, Mark II, 22/45, Competition, Government, Slab-sides and all special models prior to the release of the new Mark III series introduced in 2005.
So, you decided to disassemble your Mark pistol and now YOU CAN’T GET IT BACK TOGETHER AGAIN!

FEATURES:

  • The only CURRENT printed manual that includes information on
    ALL models from 1947 ~ 2004 (Mark I, Mark II, 22/45, etc.)
  • Contains most of the same text and high resolution graphics
    found in the CD-ROM program
  • Easy to use — lies open and flat on your work surface
  • 56 pages – 55 high-resolution grayscale images
  • Includes "rare … (more details).

Gun guide for 10/22

246 complete 10 22 book

A complete guide to the Ruger 10/22 featuring assembly and disassembly instructions and schematics.

FEATURES:

• The only current printed manual that includes information on
ALL models from 1964 ~ 2005.
• Includes all serial numbers and manufacture dates for
all models from 1964 ~ 2004!
• Easy to use – Comb binding lies open and flat on your work surface.
• 56 pages & 66 high-resolution grayscale images.
• Cardstock cover. Bright white paper.

Specs

  • 3oz base weight

Mainspring Installation for MKII, MKIII and 22/45

Volquartsen will install the reduced power mainspring found in our VC2SK. Send us your mainspring and it will generally be on its way back to you in 10-14 days.

VC Cleaning and Maintenance Mat

584 cleaning mat

Protects your table and firearms from scratches and spilled gun cleaning fluids. Perfect for rifles or handguns. The clear bonded backing prevents soak-through issues. Keeps gun parts organized and in place during cleaning or installation of Volquartsen aftermarket components. Durable, stain resistant and long lasting.

Bright orange surface makes it easy to locate parts whether they are stainless or blued!

Specs

  • Absorbent, attractive fabric
  • Waterproof, bonded backing prevents leak through
  • Easy to clean with soap and water, simply hose or power wash off
  • 14 × 40 inches
  • 4oz base weight

Thread, Crown and Drill and Tap for Front Sight

Volquartsen will professionally thread and re-crown your bull barrel. This service also includes drilling & tapping for the re-installation of the factory front sight. There is no need to take it to a gunsmith, simply send us your barrel and it will generally be on its way back to you in 10-14 days.
Available for 13/16X20, 1/2X28, or 1/2X20 threads. Please contact us for pricing on other thread needs.

Install for Browning Buckmark Target Hammer

Volquartsen will professionally install your Browning Buckmark Target Hammer into your frame. There is no need to take it to a gunsmith, simply send us your frame and it will generally be on its way back to you in 10-14 days.

Please note that if a customer sends a complete pistol in for the install it will need to be returned via UPS Air Service. The shipping charge for air service is $35.00.

Gun Guide for Browning Buckmark Pistol

726 buckmark gun guide Disassembly an reassembly guide for the Browning Buckmark Pistol.

The only current printed manual for the Browning Buck Mark & Challenger Pistols!

• Easy to use — Comb binding lies open and flat on your work surface.

• 16 pages & 20+ high-resolution grayscale images.

• Cardstock cover. Bright white paper.

Extreme Weapons Lubricant 4 oz

727 ewl 4oz

Slip 2000 Extreme Weapons Lubricant (EWL) contains a proprietary anti-wear agent that reduces friction and wear by 90-95%. Slip 2000 EWL is formulated to provide maximum performance in firearms that may have issues with friction and heat while providing all the benefits of a regular lubricant.

Slip 2000 EWL is a specially formulated synthetic liquid lubricant. Formulated with out the use of mineral oil or petroleum distillates. Slip 2000 EWL has extremely high penetrating and (EP) antiwear properties. It also combines three essential functions in a single product: Cleaning, Lubrication, and Preservation of handheld weapons, and weapons systems of both large and small caliber. This product … (more details).

Copper Cutter 4 oz

728 copper cutter

Copper Cutter from Slip2000 is specially formulated to remove copper, lead, powder residue and plastic wad fouling from bore surface with very little scrubbing!

Cleans bores in:

Rifles
Shotguns
Pistols
Revolvers

Extreme Weapons Grease 4oz

729 ewg 4 oz

Extreme Weapons Grease offers extreme pressure properties that are guaranteed to reduce friction and wear on those extreme weapons. This product contains a proprietary anti-wear package that is easy to use and long lasting. It will not attract dust, dirt or powder fouling like most petroleum based products.

Smooth clean operation in the extreme cold -100°F and will hold up under the extreme heat +750°F as well.

Does not contain Teflon or PTFE additives.

The Syringe Grease Applicator makes for a quick and easy application.

Syringe Grease Applicator

730 syringe grease applicator

Syringe Grease Applicator designed to be used with the Extreme Weapons Grease.

Install MKII or MKIII Accurizing Kit or Pistol Competition Kit

Volquartsen will professionally install your Accurizing Kit or Pistol Competition Kit. There is no need to take it to a gunsmith, simply send us your frame and it will generally be on its way back to you in 10-14 days.

Please note that if a customer sends a complete pistol in for the install it will need to be returned via UPS Air Service. The shipping charge for air service is $35.00.

All serial numbered items must be shipped to an FFL dealer.
All firearm orders require a $250 non-refundable deposit to initiate production.
Copyright ©2015 Volquartsen® Custom
Contact webmaster@volquartsen.com with website issues or suggestions.
10/22, 22/45, and Mark III are registered trademarks of Sturm, Ruger & Co., Inc.