Ruger 10/22

614-forward-blow-comp-alloy 616-ssar 404-lightweight-barrel-with-muzzle-threads 159-10-22-match-hammer-sear 603-gold-tg2000 25-10-22-silver-barrel-mount 419-versapod 165-10-22-take-down-action-screw 613-cnc-machined-bolt-silver

Stainless Match Barrel

114-ss-match-barrel-shown-w-optional-thread-protector

Our stainless steel drop-in 0.920" bull barrels set the standard in accuracy and performance for rimfire barrels. They feature match bore and chamber dimensions and vary no more than +/-0.0001" from breech to muzzle. Each barrel is digitally measured and inspected. The barrel shank is machined 0.0025" oversized to create an extremely tight fit into the factory receiver. This prevents the barrel from canting once the locking block is installed. We’ve developed our unique chamber to provide optimal accuracy but also superior function.

All barrels for the 10/22 LR are drilled and tapped to accept our Barrel Mounted Scope Mount.</ … (more details).

Precision Competition Kit

If you have always wanted to turn your 10/22 into a high performance, custom-built shooting machine, we can help you do it for less money than the cost of buying a new custom-built rifle.

Our Precision Competition Kit comes complete with our stainless steel or hard anodized aluminum replacement receiver for the 10/22, TG2000 and our competition bolt. All of these items are CNC-machined to exacting tolerances. This kit also includes our recoil buffer, receiver cross pins, locking block with retaining screws and hex-head take down action screw. All that is needed to complete your rifle is a stock and barrel.

Specs

  • 1lb 6oz base weight

Large Forward Blow Comp

319-large-forward-blow-compensator

The Large Forward Blow Comp is CNC-machined and 1.25" in diameter and 4" long.

The ports are machined at an angle that directs the noise blast downrange and away from the shooter.

Specs

  • Available with both a .920" and .875" diameter
  • 3oz base weight

Laminated Lightweight Thumbhole Stock

350-lightweight-th-orange-stock

Lightweight thumbhole stock features a high Monte Carlo comb and thumbhole to provide for upright head and hand positioning for more comfortable shooting. These stocks are CNC-machined and hand-fit. The fit, finish and tolerances on these stocks is superior to any other laminated wood stock on the market. Available in right or left hand.

Specs

  • 1lb 15oz base weight

Laminated Thumbhole Silhouette Stock

55-gray-black-thumbhole-silhouette-stock

This silhouette thumbhole features a high Monte Carlo comb and thumbhole provide for upright head and hand for more comfortable shooting. These stocks are CNC-machined and hand-fit. The finish on these stocks is superior to any other laminated wood stock on the market. Available in right or left hand.

Specs

  • 2lb 12oz base weight

TG2000

594-tg2000-colors

The TG2000 is a complete CNC-machined trigger guard equipped with precision EDM parts providing a crisp, clean 2lb trigger pull!

It features both pretravel and overtravel adjustments that can be adjusted by the shooter to their individual preference.

This match trigger guard is CNC-machined from a solid billet of high strength aircraft aluminum. The hammer, sear and disconnector are precision wire EDM-cut from A2 hardened tool steel with tolerances being held to +/- .0002" assuring every trigger let off to be extremely consistent. The CNC-machined trigger is hard black anodized.

The trigger is reset internally to eliminate any dragging or inconsistencies caused by a conventional tr … (more details).

Replacement Receiver

220-ss-receiver-w-picatinny-mount

Are you looking for an affordable way to start building a high quality semi-auto 22 LR, look no further than the Volquartsen Replacement Receivers for the Ruger 10/22. Our receivers are CNC-machined (no castings) from a solid billet of either aircraft quality aluminum or 416 stainless steel. The alloy receiver is then hard anodized to provide for years of enjoyable shooting!!

The CNC-machining process eliminates the burrs and rough surfaces that can be found in cast receivers. These burrs can create a drag on the bolt which can affect the performance of the rifle. The receiver is designed to be used with both Ruger factory bolts and trigger guards or, for the ultimate shooting performa … (more details).

Laminated Sporter Stock

126-brown-laminated-stock

These stocks are completely CNC-machined by us from start to finish in one operation. We have eliminated secondary operations which improves the quality and fit of this stock. Features a rollover cheekpiece and curved teardrop grip with a wide forend. Designed to accept bull barrel. A forend pressure pad is also installed. Available in right hand only.

Specs

  • 2lb 6oz base weight

CNC-Machined Bolt for 10/22

613-cnc-machined-bolt-silver

Complete CNC-Machined Bolt features our hardened and tuned extractor for positive, consistent extraction. It also includes our round titanium firing pin. This round design eliminates the unnecessary movement found on most 10/22 firing pins. The CNC-machining process allows us to hold the head spacing to exact dimensions eliminating the need for having your factory bolt reworked.

Bolt is case hardened and then a black nitride finish applied for improved lubricity during cycling. Ejection port side of the bolt is then polished.

Specs

  • Recoil rod and spring designed specifically for this bolt included
  • Recoil buffer included
  • 6oz base weight

Bolt Tune-Up Kit for Ruger 10/22

408-10-22-bolt-tune-up-kit

The Volquartsen Bolt Tune-Up Kit for the Ruger 10/22 (22 LR model only) rifle contains two of our most popular items ever: the Exact Edge Extractor and our SureStrike Firing Pin. This kit is designed to eliminate light hits and stovepipes.

Signature Series Bastogne Walnut Stock

427-walnut-stock

Wenig Bastogne Walnut Stock features a rollover cheekpiece designed for the right-handed shooter. 22 LPI Checkering is a standard option on this stock. Barrel channel is designed to fit a .920" bull barrel. Stock comes completely inletted and finished and is designed to be a drop-in stock for the following rifles: Ruger 10/22 (will also fit Volquartsen 22 LR and 17 Mach2) and Ruger 10/22 Magnum (will also fit Volquartsen 22 WMR and 17 HMR). Please specify when ordering.

Specs

  • 2lb 11oz base weight

Extended Bolt Handle and Recoil Rod Assembly for 10/22

154-10-22-extended-bolt-handle-black

The Extended Bolt Handle features the same shape and design as the bolt handle featured on our fully machined bolts. This handle has also been extended .25" for faster, easier operation. The recoil rod is polished, hardened and coated with a proprietary finish. This finish is not only extremely hard, but also contains lubricating features to create an extremely smooth operating guide rod. This coated recoil rod reduces friction which improves both feeding and ejecting. A recoil rod spring is also included. This spring has been cryogenically treated to withstand years of use.

Brass Escutcheon

586-brass-escutcheon

Machined escutcheon designed for 10/22 style stocks. Features straight knurl on the body for superior fit.

Specs

  • .625" OD
  • .375" thickness
  • .250" through hole with .380" counterbore diameter .140" deep

Bedding System for 10/22 and 10/22 Magnum

153-bedding-system

This is the same bedding system used on our complete rifles. Installs in less than 10 minutes. There is no mixing of compounds, no taping of barrel and no release agents required. This is designed exclusively for the “one take down action screw” design (i.e., Ruger 10/22, 10/22 Magnum). This kit comes complete with aluminum bedding block, foam pressure pad and installation drill along with complete instructions.

Inferno Comp

244-inferno-compensator

Add some flare to your rifle! The Volquartsen Inferno Compensator is now available as a separate item. CNC-machined from lightweight aluminum, this compensator is designed to not only reduce recoil but also help minimize flash.

VX-5000 Stock

328-vx-5000-stock

Features a CNC-machined forend mated with a fiberglass buttstock. The entire forend is machined, not cast, from a solid block of aircraft aluminum. The fiberglass buttstock features a vertical pistol grip for increased comfort. Made of an aluminum forend with fiberglass buttstock, right-handed or ambidextrous available (please specify)

Specs

  • 3lb 3oz base weight

Forward Blow Stabilization Module

128-front-blow-stabilization-module

Our Forward Blow Stabilization Module is designed to offer the best of both worlds – less recoil without the increase in noise.

Designed using the latest CAD technology available, the stabilization module features 16 forward angled ports. These ports are precisely optimized to align barrel gas to surround and stabilize the bullet for increased accuracy without increasing noise. And it is turned from lightweight aluminum so it will not change the balance or feel of your rifle.

Installs easily onto non-threaded .920" bull barrels with supplied socket head cap screw.

Specs

  • 2oz base weight

McMillan Fiberglass Thumbhole Stock

174-mcmillan-thumbhole-stock

Features a high rollover cheekpiece with a near vertical pistol grip. Designed to accept .925" bull barrel. A forend pressure pad is also installed. Available in right-handed only. Manufactured by McMillan Fiberglass Stocks for Volquartsen Custom.

Specs

  • 2lb 2oz base weight

Stainless Muzzle Weighted Barrel

178-ss-muzzleweighted-barrel

Our muzzleweighted barrels are designed for the shooter who requires match-grade accuracy while using the factory sporter stock. Muzzleweighted barrels offer superb balance whether used for competition or serious plinking. This barrel is built off our Stainless Match Barrel and machined to the muzzleweighted configuration. This eliminates the main compromise made in other factory-contoured barrels – the decrease in accuracy due to the narrow muzzle profile. These barrels utilize the factory contour through the stock but contour back to a full bull barrel at the muzzle to allow bull barrel accuracy.

Specs

  • 16.5" Long
  • 3lb 4oz base weight

HP Action Kit

38-10-22-hp-action-kit

This kit consists of our target hammer (includes shims and bushings), hammer spring, target disconnector, target sear and target trigger Includes polished plunger and spring) with overtravel adjustment. Also included is a recoil buffer to reduce wear on the action and bolt. The HP Action Kit will give the shooter one of the most crisp, clean trigger pulls available. Reduces trigger pull down to approximately 2.25 – 2.5lbs.

HP Action Kit Plus features our High Performance Kit, Extended Magazine Release and Auto Bolt Release.

Black or Silver option is only applicable to HP Action Kit Plus.

McMillan Fiberglass Sporter Stock

172-mcmillan-sporter-stock

A standard style hunting stock with a Monte Carlo comb and ambidextrous cheekpiece. This stock will fit right or left-handed shooters. Designed to accept .925" bull barrel. A forend pressure pad is also installed. Manufactured by McMillan Fiberglass Stocks for Volquartsen Custom.

Specs

  • 1lb 11oz base weight

Stabilization Module

35-black-stabilization-module

Aligns exiting barrel gas so it surrounds and stabilizes the bullet for increased accuracy. Turned from lightweight aluminum so it will not change the balance or feel of your rifle.

Installs easily onto non-threaded .920" bull barrels with supplied socket head cap screw.

Specs

  • 2oz base weight

Match Hammer and Sear for 10/22 and 10/22 Magnum

159-10-22-match-hammer-sear

Includes a target hammer and target sear. Both the hammer and sear are wire EDM-cut for exacting tolerances. Both parts are then hardened to a Rc 58-60. It also includes hammer shims and bushings. Reduces trigger pull down to approximately 2.25 – 2.5lbs.

V-Locking Block for 10/22 and 10/22 Magnum

346-10-22-v-block

Volquartsen CNC-machined 10/22 V-Locking Block for improved performance and accuracy. This part is machined from stainless steel and then hardened to Rc 40-42. The combination of stainless steel and the heat treating process results in an extremely rigid and durable locking block! No more worrying about over tightening the retaining screws and cracking the factory issued V-Block.

THM Tension Barrel

179-carbon-fiber-barrel-w-forward-blow-comp

The Lightweight THM Tension Barrel sets the standard for what a lightweight barrel should be. It features a sleeve that is used to create tension on the barrel itself. This unique design eliminates issues typically found in smaller barrel profiles. The THM tension barrel consists of a special taper honed match barrel and chamber. This is the ultimate lightweight barrel.

All barrels fit for the 10/22 LR are drilled and tapped to accept our Barrel Mounted Scope Mount.

Available with either a carbon fiber sleeve or an anodized aluminum sleeve. The two sleeve options are comparable in weight and performance. The anodi … (more details).

Oversized Safety for 10/22 and 10/22 Magnum

52-10-22-oversized-safety

Safety design for either a right or left handed shooter. Features an oversized head for easier access. May require slight modification to stock for installation. Fits both Ruger 10/22 LR and 10/22 Magnum rifles.

Ultralite Barrel

622-ultralite-barrel

The UltraLite barrel is a lighter weight version of our THM Tension Barrel that has set the standard for lightweight barrels. It has been taken one step further and made even lighter!

A carbon fiber sleeve is tensioned in place to eliminate barrel vibration issues typically found with smaller diameter barrels. This barrel can be set up with 1/2 × 28 threads and fitted with any of our available compensators.

Our UltraLite barrel was specifically designed for rimfire steel shooting. Its extreme lightweight design allows the shooter to transition from one plate to the next faster than ever.

Specs

  • Due to the barrel design it is not drilled & tapped to accept our barrel mounted scope mount.
  • Available in 22 LR only
  • 15oz base weight

Safety for 10/22 and 10/22 Magnum

166-10-22-safety

CNC-machined hardened steel.

Bedding System Refill Kit for 10/22 and 10/22 Magnum

152-bedding-system-refill-kit

The 10/22 Bedding System Refill kit features both the aluminum pillar as well as the foam pressure pads found in our 10/22 Bedding System. Designed for those that have already purchased the drill with stop.

Nova Scope Rings

43-nova-scope-rings-black

These rings are the ultimate in providing accuracy and rigidity. It is a Weaver style ring CNC-machined to hold exact tolerances. There is no lapping needed! The top half of the ring is secured by four, 8-40 TORX screws. A 1/4-20 cross bolt provides for quick dismount as well as consistent return to zero. The Nova Rings are ideal for mounting any scope to a hard recoiling rifle. Available in both stainless steel and hard anodized aluminum.

Specs

  • 3oz base weight

TriMag for 10/22

375-trimag

Looking for a faster way to change out between 10 round magazines? Try the The AlangatorTM TriMagTM. It requires three standard 10/22 rotary magazines. Installation is extremely quick and easy!! Designed to fit the Ruger 10/22 LR and all Volquartsen Long Rifle semi-auto rifles.

Hammer Spring/Strut Assembly for 10/22 and 10/22 Magnum

398-spring-strut-assembly

Our reduced power 10/22 hammer spring is manufactured by the leader in high quality gunsprings, Wolff Gunsprings. We have added a Nylon 11 coating to the spring to create the best 10/22 hammer spring on the market. The Nylon 11 coating is tough and extremely resistant to abrasion, wear and impact. It also has a low coefficient of friction along with good solvent and chemical resistance. This spring is designed to last! Volquartsen offers a lifetime warranty on this spring.

Spring comes complete installed on a Volquartsen hammer strut. This provides for a very quick, simple installation. The hammer strut has also been polished on the critical bearing areas to help eliminate drag d … (more details).

Hammer Spring with Nylon 11 Coating for 10/22 and 10/22 Magnum

Our reduced power 10/22 hammer spring is manufactured by the leader in high quality gunsprings, Wolff Gunsprings. We have added a Nylon 11 coating to the spring to create the best 10/22 hammer spring on the market. The Nylon 11 coating is tough and extremely resistant to abrasion, wear and impact. It also has a low coefficient of friction along with good solvent resistance. This spring is designed to last! Volquartsen offers a lifetime warranty on this spring.

Also available already installed on polished strut. Part #VC10SA

Cleaning Kit for 22 LR and 22 WMR

145-otis-cleaning-kit

A nylon coated cable designed to be used as a pull through cleaning kit bore for 22lr and 22 WMR barrels. It allows the shooter to clean from breech to muzzle without having to remove the action from the stock. Also eliminates any chance of damaging crown by cleaning from the muzzle end.

Specs

  • 4oz base weight

SureStrike Firing Pin for Ruger 10/22

409-1022-firing-pin

Volquartsen SureStrike Firing Pin is designed to minimize and/or eliminate light hits on the Ruger 10/22 (22 LR model only). The SureStrike Firing Pin is precision EDM machined from A2 tool steel. The impact section of the firing pin is then surface ground to create the optimal “SureStrike” each and every time!

This new firing pin is also .004" wider than the factory firing pin to help eliminate side to side movement in the factory bolt.

Hardened to a Rc 56-58 to prevent any excessive wear and deformation that can be found on the factory firing pin. The hardening process on the A2 material allows for a much deeper hardening when compared to conventional case hardening.

AccuTec Barrel Pusher for Ruger 10/22

420-accutec-ruger-10-22-barrel-pusher

The AccuTec 10/22® BARREL PUSHER is a tool designed to facilitate the easy removal of factory and aftermarket barrels from the receivers of Ruger® 10/22® rifles. Installation on a field stripped receiver literally takes seconds.

  • The AccuTec 10/22® Barrel Pusher allows anyone to remove an existing barrel without the need for a bench-mounted vise and literally requires no effort.
  • The Barrel Pusher will not harm, scratch or mar any portion of the barrel or receiver.
  • Any mounted scopes/optics may remain in place.
  • Works on any caliber 10/22®
  • The perfect tool for the professional or amateur gunsmith.
  • Each tool is individually inspected for quality control.
  • Lifetime … (more details).

Ruger 10/22 22 LR High Capacity Magazine

425-bx25-magazine

This genuine Ruger® 25 round factory magazine with Ruger® logo has been tested and has proven to feed as reliably as the standard BX-1™ 10-round Ruger® rotary magazine.

We cannot bill to or ship 25-round magazines to the following states and cities: California, Colorado, Connecticut , Maryland, Massachusetts, New Jersey, New York, Washington DC, Aurora, Chicago, Chicago Heights, Cicero, & Oak Park, Illinois. DO NOT ORDER THIS PRODUCT, if you live in these locations.

Specs

  • 5oz base weight

Install HP Action Kit

Volquartsen will professionally install your HP Action Kit. There is no need to take it to a gunsmith, simply send us your trigger guard and it will generally be on its way back to you in 10-14 days. Price includes return shipping of your trigger guard only.

Picatinny Scope Mount for 10/22

160-10-22-picatinny-scope-mount-black

This scope mount is a no-gunsmithing mount for the 10/22 receiver. It is CNC-machined from an aluminum alloy to Picatinny specifications. The scope mount is .480" tall to allow the mounting of larger objective scopes. An extended length of 7" allows for a more versatile mounting platform in addition to the 17 cross slots machined into the mount. The mount extends approximately 2" forward of the receiver to facilitate the mounting of a wide range of optics. Includes four mounting screws.

Specs

  • 3oz base weight

Gun guide for 10/22

246-complete-10-22-book

A complete guide to the Ruger 10/22 featuring assembly and disassembly instructions and schematics.

FEATURES:

• The only current printed manual that includes information on
ALL models from 1964 ~ 2005.
• Includes all serial numbers and manufacture dates for
all models from 1964 ~ 2004!
• Easy to use – Comb binding lies open and flat on your work surface.
• 56 pages & 66 high-resolution grayscale images.
• Cardstock cover. Bright white paper.

Specs

  • 3oz base weight

VersaPod Bipod

419-versapod

Quick detachable folding bipod. Installs on any Q.D. sling swivel stud. Includes universal mounting adapter. Adjustable from 9-12" in six increments.

Specs

  • 1lb 14oz base weight

Ruger 10/22 Magazine

45-ruger-rotary-magazine

Ruger 10/22 rotary magazine – 10 shot capacity. Factory item #BX-1.

Specs

  • 2oz base weight

Slide Fire SSAR-22 Bump-Fire Stock for Ruger 10/22

598-tg2000-slidefire-logo

The SSAR-22™ is a complete kit for the Ruger® 10/22® rifle that includes an SSAR-15® OGR stock, chassis system and our TG2000.

SSAR-15 OGR Features:
Allows shooter to shoot as quickly as desired, in a safe manner.
Easily installs on the Ruger® 10/22®.
No permanent modifications necessary.
30 day money back guarantee.
Made in the USA.
Constructed of Premium Reinforced High Strength Polymer.

Chassis System
This 10/22® Chassis System is designed to enhance the functionality and aesthetics of a standard RUGER 10/22® rifle.

Includes:
SSAR-15® OGR Rifle Stock: Black. (Right or Left Handed)
TG2000 Trigger Guard
Tac-2 … (more details).

22 Short Kit for 10/22

Designed to convert a factory 10/22 22 LR to 22 Short. It includes a CNC-machined, hard anodized, alloy bolt, recoil rod with spring, modified magazine and a reduced hammer spring.

Specs

  • 4oz base weight

22 Short Magazine for 10/22

45-ruger-rotary-magazine

Modified 10/22 magazine designed to reliably feed 22 Short. This is the same magazine included in our complete 22 Short Kit.

Specs

  • 2oz base weight

Automatic Bolt Release

39-10-22-silver-auto-bolt-release

Enables the shooter to simply pull bolt back slightly to release the bolt. This eliminates the need to push up on the bolt lock mechanism to release the bolt. This is an easy drop-in installation. Available in silver or black.

Barrel Mounted Scope Mount for 10/22

19-10-22-black-barrel-mount

A Weaver style scope mount designed to mount directly to .920" bull barrels. The mount cantilevers back over the receiver and utilizes one tension set screw in the rear of the mount for stability. It ensures that the scope will always be in alignment with the barrel regardless of any movement between the barrel and receiver. All Volquartsen bull barrels for the 10/22 will come drilled and tapped to accept this scope mount.

Specs

  • 2oz base weight

Exact Edge Extractor for 10/22 and 10/22 Magnum

44-exact-edge-extractor-for-10-22-and-mkii-mkiii

The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact such as other extractors made from stamped steel or titanium that will have their edges roll over and actually cause extraction problems after a short period of use. Our extractor features a very precise hook point. It is hardened to a Rc 58-60 to withstand years of use and still maintain its edge. We are able to hold the tolerances to +/-.0001" by utilizing the EDM manufacturing process. The hook is .005" closer to the rim of the cartridge to allow for the most positive extraction available. Made of A2 tool steel.

Extended Magazine Release for 10/22 and 10/22 Magnum

32-10-22-silver-extended-magazine-release

The extended magazine release allows for a quick release of factory magazines. Simply reach in front of the trigger guard and push forward, no more having to push up on the factory release. It extends .550" down from the trigger guard housing designed not to interfere with benchrest or sandbags during shooting. The extended magazine release is completely CNC-machined from billet material – no castings!!

Hex-Head Take Down Action Screw for 10/22 and 10/22 Magnum

165-10-22-take-down-action-screw

Hex-head screw replaces the factory slotted screw. It allows the shooter to use a torque wrench for precise and repeatable settings. No more marred slotted screws which diminish the apperance of your rifle. Made of hardened alloy steel.

Receiver Mount for 10/22

18-10-22-black-receiver-mount

A Weaver style scope mount that uses the Ruger factory receiver holes for mounting. The mount is .475" high to allow the mounting of larger objective scopes. Made of aluminum. Includes four screws for installation.

Specs

  • 2oz base weight

Recoil Buffer for 10/22 and 10/22 Magnum

47-10-22-recoil-buffer

Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin.

Target Disconnector for 10/22 and 10/22 Magnum

63-10-22-target-disconnector

Manufactured through an EDM process for exacting tolerances. Designed to be used in conjunction with match hammer and sear to provide for a very crisp, clean trigger pull. Made of A2 tool steel and hardened to Rc 58-60.

Target Hammer for 10/22 and 10/22 Magnum

164-10-22-target-hammer

Our redesigned target hammer is now wire EDM cut! The target hammer is designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer. No stoning or fitting is required. Reduces trigger pull down to approximately 2.5 – 2.75lbs. Made of stainless steel, hardened to Rc 58-60. Includes our 10/22 hammer spring, hammer bushings, hammer shims and trigger return spring.

Target Sear for 10/22 and 10/22 Magnum

62-10-22-target-sear

Manufactured through an EDM process for exacting tolerances for a crisp, light trigger pull. Drop-in item that requires no stoning. Made of A2 tool steel and hardened to Rc 58-60.

Target Trigger for 10/22 and 10/22 Magnum

167-10-22-target-trigger

Improved trigger design gives the shooter more trigger control. Also features an overtravel adjustment screw. Made of aluminum.

Competition Bolt Recoil Rod & Spring for 10/22

211-recoil-rod-spring-for-volquartsen-bolt

Recoil rod and spring assembly to fit the Volquartsen Competition Bolt (Item #VC10BLT).

Hammer Bushing for 10/22 (Package of 2)

A set of two 10/22 Hammer Bushings that have been manufactured on a Swiss screw machine. Our bushings have been redesigned to improve the overall trigger pull. One bushing features a longer shaft to give the hammer one pivot point instead of two found on the factory bushings.

All serial numbered items must be shipped to an FFL dealer.
All firearm orders require a $500 non-refundable deposit to initiate production.
Copyright ©2014 Volquartsen® Custom
Contact webmaster@volquartsen.com with website issues or suggestions.